Africa Natural Bubinga Wood Veneer Pommele Grain 0.5mm Higher Quality For Furniture And Musical Instruments China
Trade Name:Bubinga,Kevazingo
Similar:Mutenye,Libenge,Etimoe
Origin:Africa
Usage:West Africa, from East Nigeria through Gabon to Zaire drier regions in the lower tropical rain forests.Trees up to 45 m tall with conspicuously high roots. Differentiation is made between plain striped and pommele Bubinga wood,latter of which is considered the most valuable at present. Higher quality architectural woodwork and mass-produced furniture, paneling and
parquet flooring. Well-suited also for musical instruments.
Description & Specification of Natural wood veneer
| NATURAL WOOD VENEER |
| After-sale Service: | Online technical support, Onsite Training |
| Place of Origin: | Guangdong, China |
| Brand Name: | GOOD FOREST |
| Product Type: | Natural Wood Veneer - Africa Bubinga Pommele |
| Raw material: | Natural Wood Logs from North American and Africa and South East Asia. |
| Technics: | Rotary cut/Sliced Cut |
| Usage: | Fancy panel,Wallcovering,Furniture,Flooring, Door etc. |
| Size: | 2500-3200 * 140-250 * 0.18-0.55 mm |
| Certification: | FSC, ISO |
| Thickness: | 0.18-0.55mm |
| Color: | Natural / Red |
| Grain: | Pommele |
| Package Type: | Inside Pallet: wrapped with plastic paper |
| Out packing: Pallet is covered with plywood and the steel for strength. |
| Customized service: | Provide veneer splicing service |
| Provide dyeing service |
| Support video inspection |
Product Picture of Natural Wood Veneer - Africa Bubinga Pommele
Advantage of Natural wood veneer
| Imported Materials | Advanced Equipment | Huge Production Capacity |
| Quality Management System | High-Quality Service | Export Qualification
|
About Our Natural Wood Veneer
| • Length of Natural wood veneer The length of wood veneers. Short Length: 800 - 2000 mm Door Length: 2050 - 2500 mm Panel Length: 2550 - 3200 mm We can cut the veneer in a fixed size according to your requirements. | |
| • Width of Natural wood veneer Normal is 140 - 250 mm. Choose the width of wood veneers. The width of veneer will affect the effect after splicing. We can cut the veneer in a fixed size according to your requirements. |
| • Thickness of Natural wood veneer Normal is 0.18 - 0.55 mm We also can produce the special thickness of veneers according to request.We suggest to make the fleece backing or paper backing if the veneer is thin than 0.2mm. |
| • Natral Defect of Natural wood veneer Minerals: Dark Patches of pockets in wood,especially occuring in the American Oak. Knot:Overgrown branch which leaves a clearly distinct bark pattern.The earlier the tree has got rid of its branch the less visible is this characteristic in the bark Pin Knot:Fine,overgrown pin knots which can only be seen with great difficulty on the bark. Appears as a black streak at the end of the log. White Edge:The outer cell layer of the wood between bark and heartwood.Color offset in sapwood. |
| • Wood Grain of Natural wood veneer Flat Cut / Quarter Cut / Crotch / Rotary Cut/ Half Round Cut/Cathedral Strucyure / Pommele / Birdseye / Burl / Cluster / Figure We can make the veneer slip match according to your requirements. |
Wood Grain of Natural wood veneer
| Flat Cut / Crown Cut |
|
| Quarter Cut |
|
| Quarter Straight |
|
| Half Cut |
|
| Crotch |
|
| Rotary | |
Splicing processing of Natural Wood Veneer
Slip-match Book-match
Company Profile
Guangdong Great Forest New Decoration Materials Co.,LTD.
Great Forest,founded in September 2020 in Dongguan,China,
The team is found by full experienced wood industry veteran,middle-aged and young elite team
with10-30years.
Great Forest " specialize in wood veneer and panels."
1 piece of wood veneer + 2 sheets of wood panels, are the concentrated expression of Great Forest.
- 1 piece of wood veneer : Natural,Engineered, Dyed,Edge and finger joint wood veneer;
- 2 sheets of wood panels :1sheet of LSB base board and 1 sheet of real wood veneer faced panel.
The Great Forest (is) loyal to nature, loyal to wood industry, loyal to cooperation, loyal to consumption!
Welcome global wood industry partners and friends to work together for win-win future!
FAQ
Q: May I get samples from you?
A: Yes, you can. any samples are free but freight yourself before your official order.
Q: What are your MOQ, delivery date, package, and payment?
A: Our MOO is 10 m3 for panels, 100 m2 for veneer.
Q: Where is your factory, is it convenient if I go to your factory?
A: Our veneer and veneer faced panel favtories and trade company live in Dongguan of Guangdong
province,You are welcome to visit our company and factories any time.
Q: About freight instructions?
A: Different ports of destination and seasonality will result in ocean freight/air freight charge floating,
You can consultcustomer service to understand the true freight in your country.
Product Tags:
|
|
Pommele Grain Africa Natural Bubinga Wood Veneer 0.5mm For Musical Instruments Images
|
